CLM7660CP View Datasheet(PDF) - Calogic, LLC
Part Name
Description
MFG CO.
'CLM7660CP' PDF : 8 Pages View PDF
CLM7660
CORPORATION
ABSOLUTE MAXIMUM RATINGS
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +10.5V
LV and OSC Inputs
Voltage (Note 1) . . . . . . . . . . . . . . . . . . . -0.3V to (V++0.3V)
for V+ <5.5V
(V+-5.5V) to (V++0.3V)
for V+ <5.5V
Current into LV (Note 1). . . . . . . . . . . . . . . 20µA for V+ >3.5V
Output Short Duration (VSUPPLY ≤ 5.5V) . . . . . . . . Continuous
Power Dissipation (Note 2)
Plastic DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375mW
Operating Temperature Range
D Suffix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to +85oC
Storage Temperature Range . . . . . . . . . . . . . -65oC to +150oC
Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . +300oC
Static-sensitive device. Unused devices must be stored in conductive material.
Protect devices from static discharge and static fields. Stresses above those
listed under "Absolute Maximum Ratings" may cause permanent damage to the
device. These are stress ratings only and functional operation of the device at
these or any other conditions above those indicated in the operation sections of
the specifications is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS V+ = 5V, TA = +25oC, COSC = 0, Test Circuit (Figure 1), unless otherwise indicated.
SYMBOL
I+
V+H1
PARAMETER
Supply Current
Supply Voltage Range, High
V+L1
V+H2
V+L2
ROUT
Supply Voltage Range, Low
(DX Out of Circuit)
Supply Voltage Range, High
(DX In Circuit)
Supply Voltage Range, Low
(DX In Circuit)
Output Source Resistance
fOSC
PEF
VOUT EF
ZOSC
Oscillator Frequency
Power Efficiency
Voltage Conversion Efficiency
Oscillator Impedance
MIN
TYP
MAX UNIT
TEST CONDITIONS
-
80
180
µA RL = ∞
3
-
6.5
V
0oC ≤ TA ≤ +70oC, RL = 10kΩ, LV Open
3
-
5
V
-55oC ≤ TA ≤ +125oC, 10kΩ, LV Open
1.5
-
3.5
V
Min ≤ TA ≤ Max, RL = 10kΩ, LV to GND
3
-
10
V
Min ≤ TA ≤ Max, RL = 10kΩ, LV Open
1.5
-
3.5
V
Min ≤ TA ≤ Max, RL = 10kΩ, LV to GND
-
55
100
Ω
IOUT = 20mA, TA = 25oC
-
-
120
Ω
IOUT = 20mA, 0oC ≤ TA ≤ +70oC (C Device)
-
-
300
Ω
V+ = 2V, IOUT = 3mA, LV to GND
0oC ≤ TA ≤ +70oC
-
10
-
kHz
95
98
-
%
RL = 5kΩ
97
99.9
-
%
RL = ∞
-
1
-
MΩ V+ = 2V
-
100
-
kΩ V+ = 5V
NOTES:
1. Connecting any input terminal to voltages greater than C+ or less than GND may cause destructive latch-up. It is recommended that no inputs
from sources operating from external supplies be applied prior to "power up" of the CLM7660.
2. Derate linearly above 50oC by 5.5mW/ oC.
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-3025
Share Link: 
