ISDN Dual Telephony Protocol Engine
16
CMX208 Advance Information
5. Application Notes
5.1 General
The CMX208 is intended for use as part of an ISDN chipset. The MX-COM recommended hardware
implementation contains the following elements (refer to Figure 3):
• ‘S’ bus interface via RJ45 socket.
• RJ11 analog telephone sockets and analog circuitry.
• ISDN line transformer.
• AMD79C30 S-interface controller.
• Auxiliary Motorola MC145480 PCM codec.
• 64K bytes external RAM.
• 16K Non-volatile memory.
• Six processor controlled LED indicator signals.
• HDLC drivers for the 2 ISDN B-channels, both channels can be used for data transfer.
12V
50V
MOTOROLA
MC34063A 5V
MC7805CT
PSU
IOM2
BUS
HY 6281009
128K RAM
5 x Interface ICs
PARALLEL BUS
24C16
16K EEPROM
I2C
BUS
TC 1232CO
WATCHDOG
10 x LEDS
31909x029
AMD AM79C30
MOTOROLA
CMX208
S/T
S/T CONTROLLER & PCM CODEC
MC145480
PCM CODEC
4K RAM 128K ROM
API
port
TRANSFORMER
FIFO & DLC Tx DTMF,RING,TONES
PROTOCOL ENGINE
DISCRETE
POTS 1 SLIC
DISCRETE
POTS 2 SLIC
CMX605
RxDTMF
TxCLID,SPM
RING & TONES
C-BUS
POTS
port
POTS
port
CMX605
RxDTMF
TxCLID,SPM
RING & TONES
C-BUS
Figure 3: Application Block Diagram
5.2 Approvals
The firmware and finite state machine embedded in the CMX208 has been designed into products that have
gained ETSI CTR3 approval.
MX-COM, Inc
4800 Bethania Station Road, Winston-Salem, NC, 27105-1201, USA
www.mxcom.com tel: 800 638 5577 336 744 5050 fax: 336 744 5054
All trademarks and service marks are held by their respective companies
2000 MX-COM, Inc.
Doc. # 20480214.001
2000 Chiron Technology Limited