Low Power V.32 bis Modem
CMX869
8.1.3 Operating Characteristics
For the following conditions unless otherwise specified:
VDD = AVDD = DVDD = 3.0V to 3.6V at Tamb = -40 to +85°C; VSS = AVSS = DVSS;
Xtal Frequency = 6.144MHz ± 0.005% (50ppm);
0dBm corresponds to 775mVrms. General Control Register bit 14 = 0 (High Rx Gain turned off).
NOTE: All dBm limits TBD.
DC Parameters
IDD (Powersave mode)
(Reset but not powersave)
(Running, AVDD = DVDD = 3.3V)
Logic '1' Input Level
Logic '0' Input Level
Logic Input Leakage Current (Vin = 0 to DVDD),
(excluding XTAL/CLOCK input)
Output Logic '1' Level (lOH = 0.6 mA)
Output Logic '0' Level (lOL = -1.0 mA)
IRQN O/P 'Off' State Current (Vout = VDD)
RDN pin Schmitt trigger input high-going
threshold (Vthi) (see Figure 11)
RDN pin Schmitt trigger input low-going
threshold (Vtlo) (see Figure 11)
RDRVN ‘ON’ resistance to DVSS (DVDD= 3.3V)
RDRVN ‘OFF’ resistance to DVDD (DVDD= 3.3V)
Notes
1, 2
1, 3
1
4
4
Min.
-
-
-
70%
-
-1.0
80%
-
-1.0
0.56 VDD
0.44 VDD
-0.6
-
-
Typ.
6
2
12
-
-
-
-
-
-
-
-
50
1170
Max.
TBD
TBD
TBD
-
30%
+1.0
Units
µA
mA
mA
DVDD
DVDD
µA
-
VDD
+0.4
V
+1.0
µA
0.56 VDD V
+0.6
0.44 VDD V
70
Ω
3000
Ω
Notes:
1. At 25°C, not including any current drawn from the CMX869 pins by external circuitry
other than X1, C5 and C6.
2. All logic inputs at DVSS except CSN input which is at DVDD.
3. General Control Register b8 and b7 both set to 1.
4. Excluding RDN pin.
2.5
2
Vthi
Vtlo
1.5
Vin
1
0.5
0
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Vdd
Figure 11 Typical Schmitt Trigger Input Voltage Thresholds vs. VDD
© 2003 CML Microsystems Plc
40
D/869/1