CS5467 View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
'CS5467' PDF : 46 Pages View PDF
CS5467
8.3 Page 1 Registers
8.3.1 DC Offset for Current (I1OFF , I2OFF ) and Voltage (V1OFF , V2OFF )
Address: 0 (I1OFF ), 2 (V1OFF ), 7 (I2OFF ), 9 (V2OFF )
MSB
LSB
-(20) 2-1
2-2
2-3
2-4
2-5
2-6
2-7
..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23
Default = 0
DC offset registers I1OFF & V1OFF (I2OFF & V2OFF ) are initialized to zero on reset. During DC offset calibra-
tion, selected registers are written with the inverse of the DC offset measured. The application program can
also write the DC offset register values. These are two's complement values in the range of -1.0 ≤ value < 1.0,
with the binary point to the right of the MSB.
8.3.2 Gain for Current (I1GAIN , I2GAIN ) and Voltage (V1GAIN , V2GAIN )
Address: 1 (I1GAIN ), 3 (V1GAIN ), 8 (I2GAIN ), 10 (V2GAIN )
MSB
LSB
21
20
2-1
2-2
2-3
2-4
2-5
2-6
..... 2-16 2-17 2-18 2-19 2-20 2-21 2-22
Default = 1.0
Gain registers I1GAIN & V1GAIN (I2GAIN & V2GAIN) are initialized to 1.0 on reset. During AC or DC gain calibra-
tion, selected register are written with the multiplicative inverse of the gain measured. These are unsigned
fixed-point values in the range of 0 ≤ value < 4.0, with the binary point to the right of the second MSB.
8.3.3 Power Offset (P1OFF , P2OFF )
Address: 4 (P1OFF ), 11 (P2OFF )
MSB
LSB
-(20) 2-1
2-2
2-3
2-4
2-5
2-6
2-7
..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23
Default = 0
Power offset P1OFF (P2OFF ) is added to instantaneous power and averaged over a low-rate interval to yield
P1AVG (P2AVG ) register results. It can be used to reduce systematic energy errors. These are two's comple-
ment values in the range of -1.0 ≤ value < 1.0, with the binary point to the right of the MSB.
8.3.4 AC Offset for Current (I1ACOFF , I2ACOFF ) and Voltage (V1ACOFF , V2ACOFF )
Address: 5 (I1ACOFF ), 6 (V1ACOFF ), 12 (I2ACOFF ), 13 (V2ACOFF )
MSB
LSB
-(20) 2-1
2-2
2-3
2-4
2-5
2-6
2-7
..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23
Default = 0
AC offset registers I1ACOFF & V1ACOFF (VACOFF & V2ACOFF ) are initialized to zero on reset. These are added
to the RMS results before being stored to the RMS result registers. They can be used to reduce systematic
errors in the RMS results. These are two's complement values in the range of -1.0 ≤ value < 1.0, with the bi-
nary point to the right of the MSB.
34
DS714F1
Share Link: 
