CU15-12 View Datasheet(PDF) - International Power DC Power Supplies
Part Name
Description
MFG CO.
'CU15-12' PDF : 2 Pages View PDF
1
2
GENERAL SPECIFICATIONS
All specifications are typical at nominal line, full load, and 25°C.
Efficiency:
Hold-up time:
Line regulation:
Load regulation:
Inrush current:
Withstand voltage:
Insulation resistance:
Operating temperature:
Storage temperature:
MTBF:
EMI requirements:
Safety requirements:
See Table
16 msec
±0.5% maximum at full load
(10% to full load) ±1% max.
20 amps @115VAC or
40 amps @230VAC at 25°C
cold start
3000 VAC from input to output
2500 VAC from input to ground
1000 VAC from output to ground
10 Mohm min. from output
0°C to 70°C*
–40°C to +85°C
800,000 Hours
Meets conducted and radiated limits of:
a) FCC20780 Level B
b) CISPR22 Class B
Approved to:
a) UL1950
b) CSA C22.2 No. 234
c) EN60950
MECHANICAL SPECIFICATIONS
NOTES:
1. Dimensions shown in inches (mm)
2. Input connector mates with Molex
housing 09-50-3031 and Molex 2878
series crimp terminal.
3. Output connector mates with Molex housing
90-50-3041 and Molex 2878 series crimp
terminal.
INPUT SPECIFICATIONS
Input voltage:
Input frequency:
Input current:
85 to 264 VAC
47 to 63 Hz
0.80A (rms) for 115 VAC
0.50A (rms) for 230 VAC
OUTPUT SPECIFICATIONS
Output voltage:
See rating chart
Output current:
See rating chart
Ripple and noise:
1% peak to peak maximum
Voltage Adjustment: ±5%
Overvoltage protection: All outputs protected to short
circuit conditions
Temperature coefficient: All outputs ±0.05%/°C
* Derate linearly from 100% load at 45°C to 50% load at 70°C
15 WATT SERIES
10 WATT SERIES
20 WATT SERIES
Your Source of Power ...
260 Hopping Brook Road, Holliston, MA 01746
TEL: (508) 429-4440 FAX: (800) 226-2100
63
http://www.intlpower.com
Share Link: 
