DS_USB-COM422-PLUS1 View Datasheet(PDF) - Unspecified
Part Name
Description
MFG CO.
'DS_USB-COM422-PLUS1' PDF : 23 Pages View PDF
1 Introduction
Document Reference No.: FT_000131
USB-COM422-PLUS1 Datasheet
Version 1.1
Clearance No.: FTDI# 94
1.1 Functional Description
The USB-COM-Plus modules are a family of communication devices. This model, USB-COM422-Plus1,
provides a simple method of adapting legacy serial devices with RS422 interfaces to modern USB ports.
This is accomplished by incorporating the industry standard FTDI FT232R USB-Serial bridge chip.
The integrated electronics of the USB-COM422-PLUS1 utilise the FTDI FT232R and includes RS422 level
shifters plus TXD/RXD LEDs to provide a visual indication of data traffic through the module.
Figure 1.1 USB-COM422-Plus1
The module uses a standard USB-B device connector for connection to an upstream host or hub port.
RS422-level signals, including modem handshake signals, are available on an industry-standard DE-9P
connector. The maximum RS422-level data rate is 3Mbps.
The USB-COM422-Plus1 module requires USB device drivers, available free from www.ftdichip.com, which
are used to make the USB-COM422-Plus1 appear as a Virtual COM Port (VCP). This allows existing serial
communications software, such as HyperTerminal, to exchange data through the USB-COM422-Plus1 to a
legacy RS422 peripheral device.
Copyright © 2010 Future Technology Devices International Limited
1
Share Link: 
