DV4114/2N View Datasheet(PDF) - ebm-papst
Part Name
Description
MFG CO.
'DV4114/2N' PDF : 2 Pages View PDF
1
2
Max. 280 m3/h
Series DV 4100
DC diagonal fan
119 x 38 mm
– Material:
Housing: GRP1) (PBT)
– Possible special versions:
Available in die-cast aluminum (See chapter DC fans - specials)
Impeller: GRP1) (PA)
- Speed signal
– Direction of air flow: Exhaust over struts
- Go / NoGo alarm
– Direction of rotation: Counterclockwise,
- Alarm with speed limit
looking towards rotor
- External temperature sensor
– Connection:
Via single wires AWG 22,
- Internal temperature sensor
TR 64
- PWM control input
– Highlights:
Housing with grounding lug for - Analog control input
screw M4 x 8 (Torx)
- Moisture protection
– Weight:
375 g (with metal housing: 455 g) - Salt spray protection
- Degree of protection: IP 54 / IP 68
1) Fiberglass-reinforced plastic
Nominal data
Type
DV 4112 N
DV 4114 N
DV 4118 N
Subject to change
m3/h cfm VDC VDC
dB(A) Bel(A) /
Watts rpm-1
°C
280 165 12 9...15
61 6.9
21.0 6 000 -20...+65
280 165 24 16...30 61 6.9
20.5 6 000 -20...+65
280 165 48 36...60 61 6.9
20.0 6 000 -20...+65
* Power consumption at free air flow. These values can be significantly higher in the operating point.
Hours
Hours
70 000 / 40 000 117 500 ¿
70 000 / 40 000 117 500 ¿
70 000 / 40 000 117 500 ¿
Air performance measured according to: ISO 5801.
Installation category A, without contact protection.
Noise: Total sound power level LWA ISO 103002
measured on a hemisphere with a radius of 2 m.
Sound pressure level LpA measured at 1 m distance from
fan axis.
The values given are applicable only under the specified
measuring conditions and may differ depending on the
installation conditions.
In the event of deviation from the standard configuration,
the parameters must be checked after installation!
For detailed information see
http://www.ebmpapst.com/general conditions
Tin-plated
Finger guards
from p. 242
63
Share Link: 
