E15C5H2F-125.000M View Datasheet(PDF) - Ecliptek Corporation
Part Name
Description
MFG CO.
'E15C5H2F-125.000M' PDF : 6 Pages View PDF
PART NUMBER DATA SHEET
E15C5H2F-125.000M
ECLIPTEKR
CORPORATION
Test Circuit for Tri-State and Complementary Output
Power
Supply
Voltage
Meter
50 Ohms
Power
Supply
Current
Meter
Switch
0.01µF
(Note 1)
Power
Supply
Oscilloscope
Frequency
Counter
Supply
Voltage
(VDD)
Probe 2 Probe 1
(Note 2) (Note 2)
Output
50 Ohms
Complementary
0.1µF
Output
(Note 1)
Ground
Tri-State
No
Connect
Power
Supply
Note 1: An external 0.01µF ceramic bypass capacitor in parallel with a 0.1µF high frequency ceramic bypass capacitor close (less than 2mm)
to the package ground and supply voltage pin is required.
Note 2: A low capacitance (<12pF), 10X attenuation factor, high impedance (>10Mohms), and high bandwidth (>500MHz) passive probe is
recommended.
Note 3: Test circuit PCB traces need to be designed for a characteristic line impedance of 50 ohms.
www.ecliptek.com | Specification Subject to Change Without Notice | Revision D 02/25/2013 | Page 4 of 6
Ecliptek Corporation 3545 Cadillac Ave., Costa Mesa, CA 92626
1-800-ECLIPTEK or 714.433.1200
Share Link: 
