EDGE4707B View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
'EDGE4707B' PDF : 25 Pages View PDF
TEST AND MEASUREMENT PRODUCTS
PIN Description
Edge4707B
Pin Name
VINP[0:3]
IVIN[0:3]
FORCE[0:3]
Pin #
C2, F5, H3, L2
C1, F2, H4, J5
Description
Analog voltage input which forces the output voltage (FV/MI mode) (one per
channel).
Analog voltage input which forces the output current (FI/MV mode) (one per
channel).
C14, F12, H13, L12 Analog output pin which forces current or voltage.
SENSE[0:3]
FV/FI*[0:3]
MI/MV*[0:3]
RS0[0:3]
RS1[0:3]
IVMIN[0:3]
IVMAX[0:3]
DUTLTH[0:3]
DUTGTL[0:3]
DISABLE[0:3]
C13, G10, H14, K11 Analog input pin which senses voltage.
D10, B8, A6, E6
TTL compatible input which determines whether the PMU is forcing voltage or
forcing current.
B10, A8, C6, D5
TTL compatible input which determines whether the PMU is measuring current
or measuring voltage.
B11, A9, C7, C5
A12, C10, D8, A5
G5, E1, H2, K3
C3, E3, H1, L1
P11, N9, N7, N5
N11, P9, P7, P5
TTL compatible current range select inputs.
Analog input voltages which establish the lower and upper threshold level for
the measurement comparator.
Digital comparator output that indicates the DUT measurement is less than the
upper threshold and greater than the lower threshold.
A11, C9, D7, A4 TTL compatible input which places the IVMON outputs in high impedance.
E_SNSEL[0:3]
D11, E9, B7, B5 TTL switch select for the external SENSE switch for Channels 0–3.
E_SN_IN
L4
Analog output for external SENSE.
E_FC_IN
K5
Analog input for external FORCE signal.
E_FCSEL[0:3]
E10, B9, A7, D6 TTL switch select for the external FORCE switch for Channels 0–3.
I_FCSEL[0:3]
C11, D9, B6, B4 TTL switch select for internal FORCE switch for Channels 0–3.
RA[0:3], RB[0:3]
RC[0:3], RD[0:3]
D13, G11, J14, K10
D14, G12, J13, L11
E12, G14, J10, M14
F11, G13, K12, M13
External resistor input corresponding to Ranges A through D.
RES_IN[0:3]
F10, F13, J12, L13 External resistor input. One side of the external resistors connect to RA[0:3],
RB[0:3], RC[0:3], RD[0:3]. The other side of all resistors connect to RES_IN.
Revision 3 / December 18, 2002
2
www .semtech.com
Share Link: 
