EMIF02-MIC02F2 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'EMIF02-MIC02F2' PDF : 8 Pages View PDF
®
IPAD™
EMIF02-MIC02F2
2 LINES EMI FILTER
INCLUDING ESD PROTECTION
MAIN PRODUCT CHARACTERISTICS:
Where EMI filtering in ESD sensitive equipment is
required:
■ Mobile phones and communication systems
■ Computers, printers and MCU Boards
DESCRIPTION
The EMIF02-MIC02 is a highly integrated devices
designed to suppress EMI/RFI noise in all systems
subjected to electromagnetic interferences. The
EMIF02 flip chip packaging means the package
size is equal to the die size.
This filter includes an ESD protection circuitry
which prevents the device from destruction when
subjected to ESD surges up 15kV.
BENEFITS
■ EMI symmetrical (I/O) low-pass filter
■ High efficiency in EMI filtering
■ Lead free package
■ Very low PCB space consuming:
1.07mm x 1.57mm
■ Very thin package: 0.65 mm
■ High efficiency in ESD suppression
■ High reliability offered by monolithic integration
■ High reducing of parasitic elements through
integration & wafer level packaging.
COMPLIES WITH THE FOLLOWING STANDARDS:
IEC61000-4-2
Level 4 on input pins 15kV (air discharge)
8kV (contact discharge)
Level 1 on output pins 2kV (air discharge)
2kV (contact discharge)
Figure 2: Basic Cell Configuration
Flip-Chip
(6 Bumps)
Table 1: Order Code
Part Number
EMIF02-MIC02F2
Marking
FJ
Figure 1: Pin Configuration (Ball side)
32 1
I2 GND I1
A
O2 GND O1
B
Low-pass Filter
Input
Output
Ri/o = 470Ω
Cline = 16pF
GND
GND
GND
TM: IPAD is a trademark of STMicroelectronics.
October 2004
REV. 1
1/7
Share Link: 
