EMIF03-SIM04F3 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'EMIF03-SIM04F3' PDF : 7 Pages View PDF
EMIF03-SIM04F3
3-line IPAD™, EMI filter including ESD protection
Features
■ EMI symmetrical (I/O) low-pass filter
■ high efficiency in EMI/ESD protection
■ lead-free package
■ very thin package
■ high reliability offered by monolithic integration
■ high reduction of parasitic elements through
integration and wafer level packaging
Complies with the following standards
■ IEC 61000-4-2 level 4:
– ± 15 kV (air discharge)
– ± 8 kV (contact discharge)
■ IEC 61000-4-2 level 1:
– ± 2 kV (air discharge)
– ± 2 kV (contact discharge)
Applications
Where EMI filtering in ESD sensitive equipment is
required:
■ mobile phones and communication systems
■ computers, printers and MCU Boards
Description
The EMIF03-SIM04F3 Flip Chip is a low
capacitance EMI filter designed to suppress
EMI/RFI noise in all systems subjected to
electromagnetic interference.
This filter includes ESD protection circuitry, which
prevents damage to the protected device when
subjected to ESD surges up to 15 kV.
Lead-free Flip-Chip package
(11 bumps)
Figure 1. Pin configuration (bump side)
123
A
B
C
D
Figure 2. Configuration
100 Ω
A1
R1
47 Ω
B1
R2
100 Ω
C1
R3
D1 D2 D3
A3
B3
C3
A2
GND
C2
GND
A2 and C2 bumps must be connected together on the PCB
October 2010
TM: IPAD is a trademark of STMicroelectronics.
Doc ID 17053 Rev 2
1/7
www.st.com
7
Share Link: 
