EP7209 View Datasheet(PDF) - Cirrus Logic
Part Name
Description
MFG CO.
'EP7209' PDF : 128 Pages View PDF
EP7209
2.2.3 Output Bi-Directional Pins
RUN
Drive [0:1]
DD[3:0]
The RUN pin is looped back in to skew the address and data bus from each other.
Drive 0 and 1 are looped back in on power up to determine what polarity the output of the PWM should be
when active.
DD[3:0] are looped back in on power up to enable the reading of the ID of some LCD modules.
NOTE:
The above output pins are implemented as bi-directional pins to enable the output side of the pad to
be monitored and hence provide more accurate control of timing or duration:
Table 6. Output Bi-Directional Pins
DS453PP2
17
Share Link: 
