EVAL-AD5700-1EBZ View Datasheet(PDF) - Analog Devices
Part Name
Description
MFG CO.
'EVAL-AD5700-1EBZ' PDF : 24 Pages View PDF
AD5700/AD5700-1
As previously mentioned, Figure 29 shows an example secondary
HART device, incorporating two-stage protection circuitry. In
this example, a bidirectional(for protection against both positive
and negative high voltage transients) TVS is included to provide
flexibility in the polarity of the connection points of the module.
Because this module could be connected to any point on the
current loop, the higher TVS rating was chosen. The lower
rated second stage provides added protection for the AD5700/
AD5700-1 device.
TYPICAL CONNECTION DIAGRAMS
Figure 30 shows a typical connection diagram for the AD5700/
AD5700-1 using the external and internal options. See the
Connecting to HART_IN or ADC_IP section for more details.
The AD5700/AD5700-1 are designed to interface easily with
Analog Devices, Inc., innovative portfolio of industrial
converters like the AD5421 loop-powered current-output DAC,
the AD5410/AD5420 and AD5412/AD5422 family of line-
powered current-output DACs, and the AD5755-1, a quad DAC
with innovative dynamic power control technology. The
Data Sheet
combination of Analog Devices industrial converters and the
AD5700/AD5700-1 greatly simplifies system design, enhancing
reliability while reducing overall PCB size.
Figure 31 shows how the AD5700/AD5700-1 HART modem
can be interfaced with the AD5421 (4 mA to20 mA loop-powered
DAC) and the ADuCM360 microcontroller to construct a loop
powered transmitter circuit. The HART signal from
HART_OUT is introduced to the AD5421 via the CIN pin.
The HART enabled smart transmitter reference demo circuit
(the block diagram shown in Figure 32) was developed by
Analog Devices and uses the AD5421, a 16-bit, loop-powered,
4 mA to 20 mA DAC, the ADuCM360 microcontroller and the
AD5700 modem. This circuit has been compliance tested,
verified, and registered as an approved HART solution by the
HART Communication Foundation. Contact your sales
representative for further information about this demo circuit.
In conclusion, the AD5700/AD5700-1 enable quick and easy
deployment of a robust HART-compliant system.
1.71V TO 5.5V
1.71V TO 5.5V
1µF
+
10µF
0.1µF
10µF
0.1µF
1.71V TO 5.5V 1.71V TO 5.5V
1µF
+
10µF
0.1µF
10µF
0.1µF
CD
RXD
TXD
RTS
IOVCC VCC
HART_OUT
REF
AD5700/AD5700-1
ADC_IP
HART_IN
DGND AGND
1µF
1.2MΩ 300pF 150kΩ
1.2MΩ
150pF
CD
RXD
IOVCC VCC
HART_OUT
1µF
REF
TXD
AD5700/AD5700-1
680pF
RTS
ADC_IP
HART_IN
2.2nF
DGND AGND
CONFIGURATION
PINS
CONFIGURATION
PINS
Figure 30. AD5700/AD5700-1 Typical Connection Diagram for External and Internal Filter Options
Rev. G | Page 18 of 24
Share Link: 
