GL6ZS27 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'GL6ZS27' PDF : 11 Pages View PDF
lx996047
MODEL No.
I
GL6ZS27
hnil6i99
PAGE
I lO/lO
7 - 3. S oldering Conditions
Solder the lead pins under the following conditions
Type of Soldering
Conditions
1. Manual soldering
295°C25°C) within 3 seconds
2. Wave soldering
260°C+5”c, within 5 seconds
3. Auto soldering
Preheating 70°C to 8O”c, within 30 seconds
L
1 Soldering 245’C*5”c, within 5 seconds I
(Note) Avoid dipping resin into soldering bath
Avoid applying stress to lead pins while they are heated.For example ,
when the LED lamp is moved with the heat applied to the lead pins during
manual soldering or solder repair,disconnection mayoccur.
7 - 4. For cleaning
( 1) Solvent cleaning : Solvent temperature 45°C or less
Immersion for 3 min or less
(2 > Ultrasonic
cleaning : The effect to device by ultrasonic cleaning differs
by cleaning bath size,ultrasonic power
output, cleaning time,PBB size or device mounting
condition etc. Please test it in actual using condition
and confirm that doesn’t occur any defect before starting
the ultrasonic cleaning.
( 3 > Applicable solvent : Ethyl alcohol, hlethyl alcohol, Isopropyl alcohol
In case when the other solvent is us&there are cases that
the packaging resin is eroded. Please use the other solvent
after thorough confirmation is performed in actual using condition.
Share Link: 
