GP1A73AJ000F View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
GP1A73AJ000F
Sharp Electronics
'GP1A73AJ000F' PDF : 10 Pages View PDF
GP1A73AJ000F
GP1A73AJ000F
Gap : 5mm Slit : 0.5mm
*OPIC Output,
Snap-in type
Transmissive Photointerrupter with
Connector
■ Description
GP1A73AJ000F is a standard, OPIC output, transmis-
sive photointerrupter with opposing emitter and detector
in a case, providing non-contact sensing. For this fam-
ily of devices, the emitter and detector are inserted in a
case, and a 3-pin connector is included to allow remote-
mount or off-board designs.
■ Features
1. Transmissive with OPIC output
2. Highlights :
• Special position hooks compatible with 3 different
plate thicknesses (1.0, 1.2, 1.6mm)
• Hinged snap insertion
3. Key Parameters :
• Gap Width : 5mm
• Slit Width (detector side): 0.5mm
• Package : 17×12.8×8mm (without connector and
hooks)
• Connector : Tyco Electronics AMP K.K. (PN : 292133-3)
or SUMIKO TEC CO., LTD.
(PN : GH4A003P000ZA)
• Output Type : High when the object is present with
Pullup Resistor.
4. Lead free and RoHS directive compliant
■ Agency approvals/Compliance
1. Compliant with RoHS directive
■ Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : PPC, FAX, Printer
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A04601EN
1
Date Oct. 3. 2005
© SHARP Corporation
Share Link: 