HCPL-7860-000E View Datasheet(PDF) - Avago Technologies
Part Name
Description
MFG CO.
'HCPL-7860-000E' PDF : 18 Pages View PDF
Voltage Sensing
The HCPL-7860/HCPL-786J Isolated Modulator can also
be used to isolate signals with amplitudes larger than its
recommended input range with the use of a resistive volt-
age divider at its input. The only restrictions are that the
impedance of the divider be relatively small (less than 1
k:) so that the input resistance (280 k:) and input bias
current (1 PA) do not affect the accuracy of the measure-
ment. An input bypass capacitor is still required, although
the 39 : series damping resistor is not (the resistance of
the voltage divider provides the same function). The low-
pass filter formed by the divider resistance and the input
bypass capacitor may limit the achievable bandwidth. To
obtain higher bandwidth, the input bypass capacitor (C2)
can be reduced, but it should not be reduced much below
1000 pF to maintain adequate input bypassing of the iso-
lated modulator.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5989-2166EN
AV02-0409EN - March 28, 2011
Share Link: 
