HD66710A00FS View Datasheet(PDF) - Hitachi -> Renesas Electronics
Part Name
Description
MFG CO.
'HD66710A00FS' PDF : 73 Pages View PDF
HD66710
Power Supply Conditions Using Internal Reset Circuit
Item
Power supply rise time
Power supply off time
Symbol Min
Typ
Max
Unit
Test Condition
trCC
0.1
—
10
ms
Figure 33
tOFF
1
—
—
Electrical Characteristics Notes
1. All voltage values are referred to GND = 0V. If the LSI is used above these absolute maximum
ratings, it may become permanently damaged. Using the LSI within the following electrical
characteristic limits is strongly recommended for normal operation. If these electrical characteristic
conditions are also exceeded, the LSI will malfunction and cause poor reliability.
2. VCC ≥ V5 must be maintained. In addition, if the SEG37/CL1, SEG38/CL2, SEG39/D, and SEG40/M
are used as extension driver interface signals (EXT = high), GND ≥ V5 must be maintained.
3. For die products, specified up to 75°C.
4. For die products, specified by the die shipment specification.
5. The following four circuits are I/O pin configurations except for liquid crystal display output.
Input pin
Pin: E (MOS without pull-up)
VCC
Pins: RS, R/W (MOS with pull-up)
VCC
VCC
PMOS
PMOS
PMOS
NMOS
(pull up MOS)
NMOS
I/O pin
Pins: DB0 –DB7
VCC
(MOS with pull-up)
(pull-up MOS)
VCC
PMOS
(input circuit)
PMOS
Input enable
NMOS
VCC
NMOS
PMOS
NMOS
(output circuit)
(tristate)
Output enable
data
357
Share Link: 
