ICS1531 View Datasheet(PDF) - Integrated Circuit Systems

Part Name

Description

MFG CO.

ICS1531

Triple 8-bit MSPS A/D Converters with Line-Locked Clock Generator

Integrated Circuit Systems 

Prev 11 12 13 14 15 16 17 18 19 20 Next

ICS1531 Data Sheet - Preliminary

Chapter 3 Pin Diagram and Listings

3.2.3 Pin Listing by Functional Grouping

3.2.3.1 Clock Pins

For more information on the clock pins, see Figure 4-2 and Figure 4-3.)

Table 3-3. Clock Pins

Pin

Name

ADCRCLK

ADCSYNC

CLK

HSYNC

MCLK

OSCOUT

PNLCLK

REF

SCL

XIN

XOUT

Pin

Type

Pin Description

Input or

Output

Analog-to-Digital Converter Reference Clock.

• This pin outputs a half-rate pixel clock for latching digital output pixel data.

• Typically, this pin connects to an LCD panel controller/scaler.

• In this table, see also CLK.

Input or

Output

Analog-to-Digital Converter Sync.

• This pin provides a recovered HSYNC signal (that is, an HSYNC signal conditioned by a

Schmitt trigger) that aligns to ADCRCLK.

• For some previous ICS chips, the ADCSYNC pin is called FUNC.

Output Clock.

• This pin outputs the full-rate pixel clock for latching digital output pixel data.

• In this table, see also ADCRCLK.

Input Horizontal Sync. (See Table 3-6.)

Output Memory Clock.

• This pin provides an independent user-programmable clock source.

• Typically, this pin is used by LCD panel controller/scaler chips or microcontrollers.

Output

Oscillator Output.

• This output from this pin is from a crystal oscillator.

• The output frequency is one of the following:

– The same frequency as the input frequency to the crystal oscillator

– The frequency that results when the input frequency is divided by a programmable

value

Output Panel Clock.

• This pin provides an independent user-programmable clock source.

• Typically, this pin is used by LCD panel controller/scaler chips or microcontrollers.

Output Reference.

This pin provides various reference line clock sync signals.

Input Serial Clock. (See Table 3-7.)

Input

Crystal Input.

This pin accepts input from one of the following:

• A 14.31818-MHz crystal

• An external clock source

Output

Crystal Output.

Do one of the following with this pin:

• Connect it to a 14.31818-MHz crystal.

• Leave it open for an external clock source.

ICS1531 Rev N 12/1/99

Copyright © 1999, Integrated Circuit Systems, Inc.

All rights reserved.

12

December, 1999

Share Link: