ICS1893BFILF View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
MFG CO.
'ICS1893BFILF' PDF : 138 Pages View PDF
ICS1893BF Data Sheet Rev. E - Release
Chapter 8 Pin Diagram, Listings, and Descriptions
Table 8-5. PHY Address and LED Pins
Pin
Pin
Pin
Name Number Type
Pin Description
P4RD
8
Input or PHY (Address Bit) 4 / Receive Data LED.
Output For more information on this pin, see Section 5.5, “Status Interface”.
• This multi-function configuration pin is:
– An input pin during either a power-on reset or a hardware reset. In
this case, this pin configures the ICS1893BF when it is in either
hardware mode or software mode.
– An output pin following reset. In this case, this pin provides activity
status of the ICS1893.
An an input pin:
• This pin establishes the address for the ICS1893BF. When the signal
on this pin is logic:
– Low, that address bit is set to logic zero.
– High, that address bit is set to logic one.
As an output pin:
• When the signal on this pin is:
– De-asserted, this state indicates the ICS1893BF does not have
Receive activity.
– Asserted, this state indicates the ICS1893BF has Receive activity.
Caution: This pin must not float. (See the notes at Section 8.2.2,
“Multi-Function (Multiplexed) Pins: PHY Address and LED
Pins”.)
ICS1893BF, Rev. E, 8/11/09
Copyright © 2009, IDT, Inc.
All rights reserved.
95
August, 2009
Share Link: 
