ICS1893CKILF View Datasheet(PDF) - Integrated Device Technology
Part Name
Description
MFG CO.
'ICS1893CKILF' PDF : 127 Pages View PDF
ICS1893CF Data Sheet Rev. J - Release
Chapter 7 Management Register Set
7.13.8 Link Loss Inhibit (bit 18.1)
The Link Loss Inhibit bit allows an STA to prevent the ICS1893CF from dropping the link in 10Base-T
mode. When an STA sets this bit to logic:
• Zero, the state machine behaves normally and the link status is based on the signaling detected Twisted-
Pair Receiver inputs.
• One, the ICS1893CF 10Base-T Link Integrity Test state machine is forced into the ‘Link Passed’ state
regardless of the Twisted-Pair Receiver input conditions.
7.13.9 Squelch Inhibit (bit 18.0)
The Squelch Inhibit bit allows an STA to control the ICS1893CF Squelch Detection in 10Base-T mode.
When an STA sets this bit to logic:
• Zero, before the ICS1893CF can establish a valid link, the ICS1893CF must receive valid 10Base-T
data.
• One, before the ICS1893CF can establish a valid link, the ICS1893CF must receive both valid 10Base-T
data followed by an IDL.
ICS1893CF, Rev. J, 08/11/09
Copyright © 2009, Integrated Device Technology, Inc.
All rights reserved.
79
August, 2009
Share Link: 
