Integrated
Circuit
Systems, Inc.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDD
Inputs, VDD
Outputs, VDD
Package Thermal Impedance, θJA
Storage Temperature, TSTG
4.6V
-0.5V to VDD + 0.5 V
-0.5V to VDD + 0.5V
112.7°C/W (0 lfpm)
-65°C to 150°C
ICS85211I-03
LOW SKEW, 1-TO-2
DIFFERENTIAL-TO-LVHSTL FANOUT BUFFER
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device. These ratings are stress specifications only. Functional
operation of product at these conditions or any conditions be-
yond those listed in the DC Characteristics or AC Character-
istics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, VDD = 3.3V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum
VDD
Power Supply Voltage
IDD
Power Supply Current
3.135
Typical
3.3
Maximum
3.465
50
Units
V
mA
TABLE 4B. DIFFERENTIAL DC CHARACTERISTICS, VDD = 3.3V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum Typical
nCLK
IIH
Input High Current
CLK
VDD = VIN = 3.465V
VDD = VIN = 3.465V
nCLK
IIL
Input Low Current
CLK
VDD = 3.465V, VIN = 0V
VDD = 3.465V, VIN = 0V
-150
-5
VPP
VCMR
Peak-to-Peak Input Voltage
Common Mode Input Voltage;
NOTE 1, 2
0.15
0.5
NOTE 1: For single ended applications the maximum input voltage for CLK and nCLK is VDD + 0.3V.
NOTE 2: Common mode voltage is defined as VIH.
Maximum
150
150
1.3
VDD - 0.85
Units
µA
µA
µA
µA
V
V
TABLE 4C. LVHSTL DC CHARACTERISTICS, VDD = 3.3V ± 5%, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
VOH
Output High Voltage; NOTE 1
VOL
Output Low Voltage; NOTE 1
VSWING Peak-to-Peak Output Voltage Swing
NOTE 1: All outputs must be terminated with 50W to ground.
Minimum
0.7
0
0.3
Typical
0.65
Maximum
1.0
0.4
1.0
Units
V
V
V
85211AMI-03
www.icst.com/products/hiperclocks.html
3
REV. B APRIL 8, 2003