ICS9248F-66 View Datasheet(PDF) - Integrated Circuit Systems

Part Name

Description

MFG CO.

ICS9248F-66

Frequency Timing Generator for PENTIUM II Systems

Integrated Circuit Systems 

1 2 3 4 5 6 7 8 9 10

ICS9248-66

Advance Information

PCI_STOP# Timing Diagram

PCI_STOP# is an input to the clock synthesizer and must be made synchronous to the clock driver PCICLK_F output. It is used

to turn off the PCI clocks for low power operation. PCI clocks are required to be stopped in a low state and started such that a

full high pulse width is guaranteed. ONLY one rising edge of PCICLK_F is allowed after the clock control logic switched for the

PCI outputs to become enabled/disabled.

Notes:

1. All timing is referenced to CPUCLK.

2. PCI_STOP# signal is an input signal which must be made synchronous to PCICLK_F output.

3. Internal means inside the chip.

4. All other clocks continue to run undisturbed.

5. PD# and CPU_STOP# are shown in a high state.

6. Diagrams shown with respect to 133MHz. Similar operation when CPU is 100MHz.

5

Share Link: