IW4518B View Datasheet(PDF) - Integral Corp.
Part Name
Description
MFG CO.
'IW4518B' PDF : 5 Pages View PDF
TECHNICAL DATA
Dual Up-Counter
High-Voltage Silicon-Gate CMOS
IW4518B
The IW4518B Dual BCD Up-Counter consists two identical,
internally synchronous 4-stage counters. The counter stages are D-type
flip-flops having interchangeable CLOCK and ENABLE lines for
incrementing on either the positive-going or negative-going transition.
For single-unit operation the ENABLE input is maintained high and
the counter advances on each positive-going transition of the CLOCK.
The counters are cleared by high levels on their RESET lines.
The counter can be cascaded in the ripple mode by connecting Q4
to the enable input of the subsequent counter while the CLOCK input
of the latter is held low.
• Operating Voltage Range: 3.0 to 18 V
• Maximum input current of 1 µA at 18 V over full package-
temperature range; 100 nA at 18 V and 25°C
• Noise margin (over full package temperature range):
1.0 V min @ 5.0 V supply
2.0 V min @ 10.0 V supply
2.5 V min @ 15.0 V supply
ORDERING INFORMATION
IW4518BN Plastic
IW4518BD SOIC
TA = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16=VCC
PIN 8= GND
FUNCTION TABLE
Inputs
Outputs
CLOCK ENABLE RESET
Mode
H
L Increment Counter
L
L Increment Counter
X
L
No Change
X
L
No Change
L
L
No Change
H
L
No Change
X
X
H
Q1 thru Q4=L
X = don’t care
163
Share Link: 
