L5980 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'L5980' PDF : 37 Pages View PDF
Application information
L5980
5.4
Compensation network
The compensation network has to assure stability and good dynamic performance. The loop
of the L5980 is based on the voltage mode control. The error amplifier is a voltage
operational amplifier with high bandwidth. So selecting the compensation network the E/A
will be considered as ideal, that is, its bandwidth is much larger than the system one.
The transfer functions of PWM modulator and the output LC filter are studied (see). The
transfer function of the PWM modulator, from the error amplifier output (COMP pin) to the
OUT pin, results:
Equation 10
GPW0
=
V-----I-N--
Vs
where VS is the sawtooth amplitude. As seen in Chapter 4.1, the voltage feed forward
generates a sawtooth amplitude directly proportional to the input voltage, that is:
Equation 11
VS = K ⋅ VIN
In this way the PWM modulator gain results constant and equals to:
Equation 12
GPW0
=
V-----I-N--
Vs
=
-1--
K
=
9
The synchronization of the device with an external clock provided trough SYNCH pin can
modifies the PWM modulator gain (see Chapter 4.1 to understand how this gain changes
and how to keep it constant in spite of the external synchronization).
Figure 9. The error amplifier, the PWM modulator and the LC output filter
VCC
VREF
FB
VS
E/A
COMP
PWM
GPW0
OUT
L
ESR
GLC
COUT
The transfer function on the LC filter is given by:
17/37
Share Link: 
