L6206Q View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'L6206Q' PDF : 27 Pages View PDF
L6206Q
Pin connection
Pin
Name
18
IN2B
19 PROGCLB
20
ENB
21 VBOOT
22, 23 OUT2B
26, 27 VSB
34, 35 VSA
38, 39
40
OUT2A
VCP
41
ENA
42 PROGCLA
Table 3. Pin description (continued)
Type
Function
Logic input Bridge B input 2
R pin
Bridge B overcurrent level programming. A resistor connected between
this pin and ground sets the programmable current limiting value for
bridge B. By connecting this pin to ground the maximum current is set.
This pin cannot be left unconnected.
Logic input
Bridge B enable. LOW logic level switches OFF all Power MOSFETs of
bridge B. If not used, it must be connected to +5 V.
Supply voltage
Bootstrap voltage needed for driving the upper Power MOSFETs of both
bridge A and bridge B.
Power output Bridge B output 2.
Power supply
Bridge B power supply voltage. It must be connected to the supply
voltage together with pin VSA.
Power supply
Bridge A power supply voltage. It must be connected to the supply
voltage together with pin VSB.
Power output Bridge A output 2.
Output
Charge pump oscillator output.
Logic input
Bridge A enable. LOW logic level switches OFF all Power MOSFETs of
bridge A. If not used, it must be connected to +5 V.
R pin
Bridge A overcurrent level programming. A resistor connected between
this pin and ground sets the programmable current limiting value for
bridge A. By connecting this pin to ground, the maximum current is set.
This pin cannot be left unconnected.
DocID022028 Rev 3
5/27
27
Share Link: 
