LH1684F View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'LH1684F' PDF : 34 Pages View PDF
LH1684F
26
12. P.4CKXGE AND PACKING SPECIFICATION
1. Package Outline Specification
Refer to drawing No. SPN4701-00
2. Markings
The meanings of the device code printed on each tape carrier
(1) Date code (example) : --5-- 3 8 D 0
a) b) c) d)
a) denotes the last figure of Arino Domini (of production)
b) denotes the week (of production)
c) denotes factory code (of production)
d) denotes the number of times of alteration
3. Packing Specifications
package are as follows.
3-2 Packing Form
a) Tape carrier package(TCP) is wound on a reel
* Specification of label
with separator and the ends of them are fixed
with adhesive tape.
b) A label indicating production name, lot no.
TYPE
and quantity is stuck on one side of the reel.
Production name
c) The reel and silica gel is put in a laminated
Lot No:
aluminium bag. Nitrogen gas is enclosed in
the bag and the bag is sealed. The same
QUANTITY
Quantity
label(b) is affixed to the bag. The bag is put
in a carton and the same label(b) is affixed
LQT(DATE) Shipping date
to one side of the inner carton.
d) 5 inner cartons are put in an outer carton and the same
label(b) is affixed to one side of the outer carton.
3-3 Other
(1) The length of the TCP is typically 40 m per reel, but this may change in
accordance with the inventory quantity.
(2) Faulty devices is conpletely punched out at the part of the device.
(3) The maximum number of continuous faulty devices is 9.
I
ISSUE DATE
AUG 28.1996 APPROVE CHECK DESIGN (NO-W
ISSUE NUMBER
H8801
4 S/C NUMBER
Share Link: 
