LPC1767 View Datasheet(PDF) - Philips Electronics
Part Name
Description
MFG CO.
'LPC1767' PDF : 66 Pages View PDF
NXP Semiconductors
LPC1769/68/67/66/65/64
32-bit ARM Cortex-M3 microcontroller
VDD(3V3)
VSS
VDD(REG)(3V3)
LPC17xx
to I/O pads
3.3 V REGULATOR
MAIN POWER DOMAIN
to core
to memories,
peripherals,
oscillators,
PLLs
VBAT
RTCX1
RTCX2
VDDA
VREFP
VREFN
VSSA
POWER
SELECTOR
32 kHz
OSCILLATOR
ULTRA-LOW
POWER
REGULATOR
BACKUP REGISTERS
REAL-TIME CLOCK
RTC POWER DOMAIN
DAC
ADC
ADC POWER DOMAIN
Fig 5. Power distribution
002aad978
7.30 System control
7.30.1 Reset
Reset has four sources on the LPC17xx: the RESET pin, the Watchdog reset, power-on
reset (POR), and the BrownOut Detection (BOD) circuit. The RESET pin is a Schmitt
trigger input pin. Assertion of chip Reset by any source, once the operating voltage attains
a usable level, starts the Wake-up timer (see description in Section 7.29.5), causing reset
to remain asserted until the external Reset is de-asserted, the oscillator is running, a fixed
number of clocks have passed, and the flash controller has completed its initialization.
When the internal Reset is removed, the processor begins executing at address 0, which
is initially the Reset vector mapped from the Boot Block. At that point, all of the processor
and peripheral registers have been initialized to predetermined values.
LPC1769_68_67_66_65_64_4
Product data sheet
Rev. 04 — 1 February 2010
© NXP B.V. 2010. All rights reserved.
36 of 66
Share Link: 
