NXP Semiconductors
LPC2212/2214
16/32-bit ARM microcontrollers
7. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).[1]
Symbol
Parameter
Conditions
VDD(1V8)
VDD(3V3)
VDDA(3V3)
VIA
VI
supply voltage (1.8 V)
supply voltage (3.3 V)
analog supply voltage (3.3 V)
analog input voltage
input voltage
5 V tolerant I/O pins
other I/O pins
IDD
ISS
Tj
Tstg
Ptot(pack)
supply current
ground current
junction temperature
storage temperature
total power dissipation (per
package)
based on package heat
transfer, not device power
consumption
Vesd
electrostatic discharge voltage human body model
all pins
machine model
all pins
Min
[2] −0.5
[3] −0.5
−0.5
−0.5
[4][5] −0.5
[4][6] −0.5
[7][8] -
[8][9] -
-
[10] −65
-
[11]
−2 000
[12]
−200
Max
+2.5
+3.6
+4.6
+5.1
+6.0
VDD(3V3) + 0.5
100
100
150
+150
1.5
Unit
V
V
V
V
V
V
mA
mA
°C
°C
W
+2 000
V
+200
V
[1] The following applies to Table 5:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to VSS unless
otherwise noted.
[2] Internal rail.
[3] External rail.
[4] Including voltage on outputs in 3-state mode.
[5] Only valid when the VDD(3V3) supply voltage is present.
[6] Not to exceed 4.6 V.
[7] Per supply pin.
[8] The peak current is limited to 25 times the corresponding maximum current.
[9] Per ground pin.
[10] Dependent on package type.
[11] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 kΩ series resistor.
[12] Machine model: equivalent to discharging a 200 pF capacitor through a 0.75 µH coil and a 10 Ω series resistor.
LPC2212_2214_4
Product data sheet
Rev. 04 — 3 January 2008
© NXP B.V. 2008. All rights reserved.
26 of 45