LPC47B37X View Datasheet(PDF) - SMSC -> Microchip
Part Name
Description
MFG CO.
LPC47B37X
SMSC -> Microchip
'LPC47B37X' PDF : 254 Pages View PDF
The data is based upon the following formula:
Threshold #
x
1
DATA
RATE
x 8 - 1.5 µs = DELAY
At the start of a command, the FIFO action is always disabled and command parameters are sent based
upon the RQM and DIO bit settings. As the command execution phase is entered, the FIFO is cleared of
any data to ensure that invalid data is not transferred.
An overrun or underrun will terminate the current command and the transfer of data. Disk writes will
complete the current sector by generating a 00 pattern and valid CRC. Reads require the host to remove
the remaining data so that the result phase may be entered.
Table 11 - FIFO Service Delay
FIFO THRESHOLD MAXIMUM DELAY TO SERVICING AT
EXAMPLES
2 Mbps DATA RATE
1 byte
2 bytes
8 bytes
15 bytes
1 x 4 µs - 1.5 µs = 2.5 µs
2 x 4 µs - 1.5 µs = 6.5 µs
8 x 4 µs - 1.5 µs = 30.5 µs
15 x 4 µs - 1.5 µs = 58.5 µs
FIFO THRESHOLD
EXAMPLES
1 byte
2 bytes
8 bytes
15 bytes
MAXIMUM DELAY TO SERVICING AT
1 Mbps DATA RATE
1 x 8 µs - 1.5 µs = 6.5 µs
2 x 8 µs - 1.5 µs = 14.5 µs
8 x 8 µs - 1.5 µs = 62.5 µs
15 x 8 µs - 1.5 µs = 118.5 µs
FIFO THRESHOLD
EXAMPLES
1 byte
2 bytes
8 bytes
15 bytes
MAXIMUM DELAY TO SERVICING AT
500 Kbps DATA RATE
1 x 16 µs - 1.5 µs = 14.5 µs
2 x 16 µs - 1.5 µs = 30.5 µs
8 x 16 µs - 1.5 µs = 126.5 µs
15 x 16 µs - 1.5 µs = 238.5 µs
Digital Input Register (DIR)
Address 3F7 READ ONLY
This register is read-only in all modes.
31
Share Link: 