LRS13023 View Datasheet(PDF) - Sharp Electronics
Part Name
Description
MFG CO.
'LRS13023' PDF : 61 Pages View PDF
SHARI=
LRS13023
30
ELECTRICAL SPECIFICATIONS
.1 Absolute Maximum Ratings*
:ommercial
Operating Temperature
During Read, Block Erase, Byte Write
and Lock-Bit Configuration .........-40°C to +85@)
Temperature under Bias ..................-40°C to +85”C
Storage Temperature .............................-65°C to +125”C
4Toltage On Any Pin
(except Vcc, VP,, and m> ............-2.OV to +7.0Vt2)
rc- Supply Voltage .............................. -2.OV to +7.0Vt2)
TPPUpdate Voltage during
Block Erase, Byte Write and
Lock-Bit Configuration ..............-2.OV to +14.OV(23)
Tr Voltage with Respect to
GND during Lock-Bit
Configuration Operations .........-2,OV to +14.0V(2J)
COutput Short Circuit Current .......................... lOOmA(4)
*WARNING: Stressing the device beyond the ‘Absolute
Maximum Ratings” may cause permanent damage.
These are stress ratings only. Operation beyond the
“Operating Conditions” is not recommended and
extended exposure beyond the “Operating Conditions”
may affect device reliability.
NOTES:
1. Operating temperature is for commercial product
defined by this specification.
2. All specified voltages are with respect to GND.
Minimum DC voltage is -0SV on input/output pins
and -0.2V on Vc- and V, pins. During transitions,
this level may undershoot to -2.OV for periods
~2011s. Maximum DC voltage on input/output pins
and V,, is V,,+O.5V which, during transitions,
may overshoot to V,, +2.OV for periods <2Ons.
3. Maximum DC voltage on VP, and Rp may overshoot
to +14.OV for periods c2Ons.
4. Output shorted for no more than one second. No
more than one output shorted at a time.
6.2 Operating Conditions
Temperature and V,,
Symbol
Parameter
Notes
T*
Operating Temperature
V,,,
V,, Supply Voltage (2.7V-3.6V)
1
JOTE:
. FLASH Erase/Write (TA=O to 85°C)
Operating
Min
-40
2.7
Conditions
Max
unit
+85
“C
3.6
V
Test Condition
Ambient Temperature
Share Link: 
