LT1632CS8 View Datasheet(PDF) - Linear Technology
Part Name
Description
MFG CO.
LT1632CS8
Linear Technology
'LT1632CS8' PDF : 16 Pages View PDF
LT1632/LT1633
TYPICAL APPLICATIONS
temperature range. The op amp A1 combined with Q1, Q2,
R1, R2 and R3 establishes two current sources of 21.5mA
to bias RF1 and RF2 amplifiers. The current of Q1, is
determined by the voltage across R2 over R1, which is
then replicated in Q2. These current sources are stable and
precise over temperature and have a low dissipated power
due to a low voltage drop between their terminals. The
amplifier A2 is used to restore the DC level at the output.
With a large output current of the LT1632, the output can
be set at 1.5V DC on 5V supply and 50โฆ load. This circuit
has a โ 3dB bandwidth from 2MHz to 2GHz and a power
gain of 25dB.
PACKAGE DESCRIPTION Dimensions in inches (millimeters) unless otherwise noted.
0.300 โ 0.325
(7.620 โ 8.255)
N8 Package
8-Lead PDIP (Narrow 0.300)
(LTC DWG # 05-08-1510)
0.045 โ 0.065
(1.143 โ 1.651)
0.130 ยฑ 0.005
(3.302 ยฑ 0.127)
0.400*
(10.160)
MAX
8
7
6
5
0.009 โ 0.015
(0.229 โ 0.381)
0.065
(1.651)
TYP
+0.035
0.325 โ0.015
( ) 8.255
+0.889
โ0.381
0.100 ยฑ 0.010
(2.540 ยฑ 0.254)
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCH (0.254mm)
0.125
(3.175)
MIN
0.018 ยฑ 0.003
(0.457 ยฑ 0.076)
0.020
(0.508)
MIN
0.255 ยฑ 0.015*
(6.477 ยฑ 0.381)
12
34
N8 1197
S8 Package
8-Lead Plastic Small Outline (Narrow 0.150)
(LTC DWG # 05-08-1610)
0.010
(0.254
โ
โ
0.020
0.508)
ร
45ยฐ
0.008 โ 0.010
(0.203 โ 0.254)
0ยฐโ 8ยฐ TYP
0.053 โ 0.069
(1.346 โ 1.752)
0.016 โ 0.050
0.406 โ 1.270
0.014 โ 0.019
(0.355 โ 0.483)
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
0.004 โ 0.010
(0.101 โ 0.254)
0.050
(1.270)
TYP
0.228 โ 0.244
(5.791 โ 6.197)
0.189 โ 0.197*
(4.801 โ 5.004)
8
7
6
5
1
2
34
0.150 โ 0.157**
(3.810 โ 3.988)
SO8 0996
0.010
(0.254
โ
โ
0.020
0.508)
ร
45ยฐ
0.008 โ 0.010
(0.203 โ 0.254)
0.053 โ 0.069
(1.346 โ 1.752)
0ยฐ โ 8ยฐ TYP
0.016 โ 0.050
0.406 โ 1.270
0.014 โ 0.019
(0.355 โ 0.483)
*DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
**DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
S Package
14-Lead Plastic Small Outline (Narrow 0.150)
(LTC DWG # 05-08-1610)
0.337 โ 0.344*
(8.560 โ 8.738)
14 13 12 11 10
9
0.004 โ 0.010
(0.101 โ 0.254)
0.050
(1.270)
TYP
0.228 โ 0.244
(5.791 โ 6.197)
1
2
3
4
5
6
8
0.150 โ 0.157**
(3.810 โ 3.988)
7
S14 0695
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no represen-
tation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
15
Share Link: 