LT1777C View Datasheet(PDF) - Linear Technology
Part Name
Description
MFG CO.
'LT1777C' PDF : 24 Pages View PDF
LT1777
APPLICATIONS INFORMATION
As an example, assume that the capacitance between the
VSW node and a high impedance pin node is 0.1pF, and that
the high impedance node in question exhibits a capaci-
tance of 1pF to ground. Also assume a “typical” 36VIN to
5VOUT application. Due to the large voltage excursion at
the VSW node, this will couple a 3.5V(!) transient to the
high impedance pin, causing abnormal operation. An
explicit 100pF capacitor added to the node will reduce the
amplitude of the disturbance to more like 35mV (although
settling time will increase).
Specific pin recommendations are as follows:
SHDN: If unused, add a 100pF capacitor to ground.
SYNC: Ground if unused.
VC: Add a capacitor directly to ground in addition to the
explicit compensation network. A value of one-tenth of
the main compensation capacitor is recommended, up
to a maximum of 100pF.
FB: Assuming the VC pin is handled properly, this pin
usually requires no explicit capacitor of its own, but
keep this node physically small to minimize stray
capacitance.
16
Share Link: 
