Micron M25P16 Serial Flash Embedded Memory
Revision History
Revision History
Rev. J – 1/18
Rev. I – 4/15
Rev. H – 1/14
Rev. G – 1/13
Rev. F – 10/12
Rev. E – 8/12
Rev. D – 5/12
Rev. C – 3/12
Rev. B – 3/12
• Added Important Notes and Warnings section for further clarification aligning to in-
dustry standards
• UID programmed for package UFDFPN8 4 x 3
• Updated note 1 in the Read Identification Data Out Sequence table
• In standard and automotive ordering information, revised package option and
changed Fab 2 to Fab 13
• Removed part numbers from page 1
• Updated READ Identification in the Command Set Codes table to include 9Eh infor-
mation
• Updated SO8W 208 mils Body Width drawing
• Updated Device Ordering Information section
• Updated ordering information and package options
• Deleted old, extraneous pre-Micron revision history changes
• Updated Command Set to include RELEASE FROM DEEP POWER-DOWN
• Updated Memory Map to eliminate the 64KB block box
• In Signal Names table, changed direction column for DQ0 and DQ1 to input and out-
put respectively
• Changed the Write Disable Command Sequenced graphic
• Revised Write Status Register topic
• Revised Power-Up/Down and Supply Line Decoupling topic
• Updated address range in Memory Map
• Corrected error in SO8N package drawing.
• Updated packing options in the Part Number Information Scheme table in Device Or-
dering Information
PDF: 09005aef8456656c
m25p16.pdf - Rev. J 1/18 EN
61
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.