M29W128GL60N6F View Datasheet(PDF) - Numonyx -> Micron
Part Name
Description
MFG CO.
M29W128GL60N6F
Numonyx -> Micron
'M29W128GL60N6F' PDF : 94 Pages View PDF
M29W128GH, M29W128GL
DC and AC parameters
Figure 17. Write Enable Controlled Program waveforms (16-bit mode)
A0-A22
E
G
W
DQ0-DQ1',
DQ15A–1
3rd cycle 4th cycle
tAVAV
555h
PA
Data Polling
Read cycle
tAVAV
PA
tELWL
tAVWL
tWLAX
tWHEH
tELQV
tGHWL
tGLQV
tWLWH
tWHWL
tDVWH
AOh
PD
tWHDX
tWHWH1
tGHQZ
DQ7 DOUT
DOUT
tAXQX
AI13699
1. Only the third and fourth cycles of the Program command are represented. The Program command is followed by the check
of Status Register Data Polling bit and by a read operation that outputs the data, DOUT, programmed by the previous
Program command.
2. PA is the address of the memory location to be programmed. PD is the data to be programmed.
3. DQ7 is the complement of the data bit being programmed to DQ7 (see Section 7.2.1: Data Polling bit (DQ7)).
4. SeeTable 27: Write AC characteristics, Write Enable Controlled, Table 28: Write AC characteristics, Chip Enable
Controlled and Table 26: Read AC characteristics for details on the timings.
67/94
Share Link: 