M40Z300MH1E View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M40Z300MH1E' PDF : 25 Pages View PDF
DC and AC parameters
4
DC and AC parameters
M40Z300, M40Z300W
Note:
This section summarizes the operating and measurement conditions, as well as the DC and
AC characteristics of the device. The parameters in the following DC and AC characteristic
tables are derived from tests performed under the measurement conditions listed in Table 4:
DC and AC measurement conditions. Designers should check that the operating conditions
in their projects match the measurement conditions when using the quoted parameters.
Table 4.
DC and AC measurement conditions
Parameter
M40Z300
VCC supply voltage
Ambient operating temperature
Load capacitance (CL)
Input rise and fall times
Input pulse voltages
Input and output timing ref. voltages
Grade 1
Grade 6
4.5 to 5.5 V
0 to 70 °C
–40 to 85 °C
100 pF
≤ 5 ns
0 to 3 V
1.5 V
Output High Z is defined as the point where data is no longer driven.
M40Z300W
2.7 to 3.6 V
0 to 70 °C
–40 to 85 °C
50 pF
≤ 5 ns
0 to 3 V
1.5 V
Figure 8. AC testing load circuit
DEVICE
UNDER
TEST
333Ω
CL = 100pF
or 50pF
1.73V
Note:
CL includes JIG capacitance
50 pF for M40Z300W.
Table 5. Capacitance
Symbol
Parameter(1)(2)
Min
CIN Input capacitance
-
COUT(3) Input/output capacitance
-
1. Sampled only, not 100% tested.
2. At 25 °C, f = 1 MHz.
3. Outputs deselected.
Max
8
10
AI02393
Unit
pF
pF
14/25
Doc ID 5679 Rev 5
Share Link: 
