M7020R-083ZA1 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
'M7020R-083ZA1' PDF : 150 Pages View PDF
M7020R
DC AND AC PARAMETERS
This section summarizes the operating and mea-
surement conditions, as well as the DC and AC
characteristics of the device. The parameters in
the following DC and AC Characteristic tables are
derived from tests performed under the Measure-
ment Conditions listed in the relevant tables. De-
signers should check that the operating conditions
in their projects match the measurement condi-
tions when using the quoted parameters.
Table 4. DC and AC Measurement Conditions
Sym
Parameter
Min
Max
Units
VDD VDD Operating Supply Voltage
1.7
1.9
V
VDDQ VDDQ Voltage for I/O (3.3V)
3.135
3.465
V
VDDQ VDDQ Voltage for I/O (2.5V)
2.4
2.6
V
tA Ambient Operating Temperature
0
70
°C
Supply Voltage Tolerance
–5
+5
%
Input Pulse Levels (VDDQ = 3.3V)
GND to 3.0
V
Input Pulse Levels (VDDQ = 2.5V)
GND to 2.5
V
Input Rise and Fall Times at 0.3V and 2.7V (VDDQ = 3.3V)
≤ 2ns (see Figure 6, page 14)
ns
Input Rise and Fall Times at 0.25V and 2.25V (VDDQ = 2.5V)
≤ 2ns (see Figure 6, page 14)
ns
Input Timing Reference Levels (VDDQ = 3.3V)
1.5
V
Input Timing Reference Levels (VDDQ = 2.5V)
1.25
V
Output Timing Reference Levels (VDDQ = 3.3V)
1.5
V
Output Timing Reference Levels (VDDQ = 2.5V)
1.25
V
Output Load
(see Figure 5 and Figure 7, page 14) V
Note: 1. Maximum allowable applies to overshoot only (VDDQ is 3.3V supply).
2. Minimum allowable applies to undershoot only.
13/150
Share Link: 
