MC9S08SH4 View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
MFG CO.
'MC9S08SH4' PDF : 341 Pages View PDF
Chapter 10 Internal Clock Source (S08ICSV2)
10.1.2 Features
Key features of the ICS module follow. For device specific information, refer to the ICS Characteristics in
the Electricals section of the documentation.
• Frequency-locked loop (FLL) is trimmable for accuracy
— 0.2% resolution using internal 32kHz reference
— 2% deviation over voltage and temperature using internal 32kHz reference
• Internal or external reference clocks up to 5MHz can be used to control the FLL
— 3 bit select for reference divider is provided
• Internal reference clock has 9 trim bits available
• Internal or external reference clocks can be selected as the clock source for the MCU
• Whichever clock is selected as the source can be divided down
— 2 bit select for clock divider is provided
– Allowable dividers are: 1, 2, 4, 8
– BDC clock is provided as a constant divide by 2 of the DCO output
• Control signals for a low power oscillator as the external reference clock are provided
— HGO, RANGE, EREFS, ERCLKEN, EREFSTEN
• FLL Engaged Internal mode is automatically selected out of reset
10.1.3 Block Diagram
Figure 10-2 is the ICS block diagram.
MC9S08SH8 MCU Series Data Sheet, Rev. 3
Freescale Semiconductor
151
Share Link: 
