MC9S08SL8 View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
MFG CO.
'MC9S08SL8' PDF : 356 Pages View PDF
Chapter 3
Modes of Operation
3.1 Introduction
The operating modes of the MC9S08EL32 Series and MC9S08SL16 Series are described in this chapter.
Entry into each mode, exit from each mode, and functionality while in each of the modes is described.
3.2 Features
• Active background mode for code development
• Wait mode — CPU shuts down to conserve power; system clocks are running and full regulation
is maintained
• Stop modes — System clocks are stopped and voltage regulator is in standby
— Stop3 — All internal circuits are powered for fast recovery; RAM and register contents are
retained
— Stop2 — Partial power down of internal circuits; RAM content is retained
3.3 Run Mode
This is the normal operating mode for the MC9S08EL32 Series and MC9S08SL16 Series. This mode is
selected when the BKGD/MS pin is high at the rising edge of reset. In this mode, the CPU executes code
from internal memory with execution beginning at the address fetched from memory at 0xFFFE–0xFFFF
after reset.
3.4 Active Background Mode
The active background mode functions are managed through the background debug controller (BDC) in
the HCS08 core. The BDC, together with the on-chip debug module (DBG), provide the means for
analyzing MCU operation during software development.
Active background mode is entered in any of five ways:
• When the BKGD/MS pin is low at the rising edge of reset
• When a BACKGROUND command is received through the BKGD/MS pin
• When a BGND instruction is executed
• When encountering a BDC breakpoint
• When encountering a DBG breakpoint
After entering active background mode, the CPU is held in a suspended state waiting for serial background
commands rather than executing instructions from the user application program.
MC9S08EL32 Series and MC9S08SL16 Series Data Sheet, Rev. 3
Freescale Semiconductor
31
Share Link: 
