MPC5607B View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
MFG CO.
'MPC5607B' PDF : 110 Pages View PDF
Package pinouts and signal descriptions
Table 3. Voltage supply pin descriptions (continued)
Port pin
Function
100 LQFP
Pin number
144 LQFP 176 LQFP 208 MAPBGA
VDD_HV_ADC1 Reference voltage and analog supply
60
82
99
K13
for the A/D converter 1 (12-bit)
1 A decoupling capacitor must be placed between each of the three VDD_LV/VSS_LV supply pairs to ensure stable
voltage (see the recommended operating conditions in the device data sheet).
3.5 Pad types
In the device the following types of pads are available for system pins and functional port pins:
S = Slow1
M = Medium1 2
F = Fast1 2
I = Input only with analog feature1
J = Input/Output (‘S’ pad) with analog feature
X = Oscillator
3.6 System pins
The system pins are listed in Table 4.
Table 4. System pin descriptions
Port pin
Function
RESET
configuration
100
LQFP
RESET Bidirectional reset with Schmitt-Trigger I/O M Input weak
17
characteristics and noise filter.
pull-up after
RGM PHASE2
and 40 FIRC
cycles
EXTAL Analog output of the oscillator
I/O X
Tristate
36
amplifier circuit, when the oscillator is
not in bypass mode.
Analog input for the clock generator
when the oscillator is in bypass mode.
XTAL Analog input of the oscillator amplifier I X
Tristate
34
circuit. Needs to be grounded if
oscillator bypass mode is used.
1 208 MAPBGA available only as development package for Nexus2+
Pin number
144
LQFP
21
176 208 MAP
LQFP BGA1
29
J1
50
58
N8
48
56
P8
1. See the I/O pad electrical characteristics in the chip data sheet for details.
2. All medium and fast pads are in slow configuration by default at reset and can be configured as fast or medium. The only
exception is PC[1] which is in medium configuration by default (see the PCR.SRC description in the chip reference manual, Pad
Configuration Registers (PCR0–PCR148)).
MPC5607B Microcontroller Data Sheet, Rev. 6
Freescale Semiconductor
13
Share Link: 
