MT28F008B5VG-8T View Datasheet(PDF) - Micron Technology
Part Name
Description
MFG CO.
'MT28F008B5VG-8T' PDF : 30 Pages View PDF
8Mb
SMART 5 BOOT BLOCK FLASH MEMORY
ABSOLUTE MAXIMUM RATINGS*
Voltage on VCC Supply Relative to VSS .... -0.5V TO +6V**
Input Voltage Relative to VSS ................... -0.5V TO +6V**
VPP Voltage Relative TO VSS .....................-0.5V TO +5.5V†
RP# or A9 Pin Voltage Relative to Vss... -0.5V to +12.6V†
Temperature Under Bias..........................-40ºC to +85ºC
Storage Temperature (plastic) ...............-55ºC to +125ºC
Power Dissipation ....................................................... 1W
*Stresses greater than those listed under “Absolute
Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only, and functional
operation of the device at these or any other condi-
tions above those indicated in the operational sections
of this specification is not implied. Exposure to abso-
lute maximum rating conditions for extended periods
may affect reliability.
**VCC, input and I/O pins may transition to -2V for
<20ns and VCC + 2V for <20ns.
†Voltage may pulse to -2V for <20ns and 14V for <20ns.
ELECTRICAL CHARACTERISTICS AND RECOMMENDED DC READ OPERATING
CONDITIONS
Commercial Temperature (0ºC ≤ TA ≤ +70ºC) and Extended Temperature (-40ºC ≤ TA ≤ +85ºC)
PARAMETER/CONDITION
Supply Voltage
Input High (Logic 1) Voltage, all inputs
Input Low (Logic 0) Voltage, all inputs
Device Identification Voltage, A9
SYMBOL
VCC
VIH
VIL
VID
MIN
4.5
2
-0.5
10
MAX
5.5
VCC + 0.5
0.8
12.6
UNITS
V
V
V
V
NOTES
1
1
1
1
DC OPERATING CHARACTERISTICS
Commercial Temperature (0ºC ≤ TA ≤ +70ºC) and Extended Temperature (-40ºC ≤ TA ≤ +85ºC)
PARAMETER/CONDITION
OUTPUT VOLTAGE LEVELS (TTL)
Output High Voltage (IOH = -2.5mA)
Output Low Voltage (IOL = 5.8mA)
OUTPUT VOLTAGE LEVELS (CMOS)
Output High Voltage (IOH = -100µA)
INPUT LEAKAGE CURRENT
Any input (0V ≤ VIN ≤ VCC); All other pins not under test = 0V
INPUT LEAKAGE CURRENT: VHH INPUT
(10V ≤ VHH ≤ 12.6V = VID)
INPUT LEAKAGE CURRENT: RP# INPUT
(10V ≤ RP# ≤ 12.6V = VHH)
OUTPUT LEAKAGE CURRENT
(DOUT is disabled; 0V ≤ VOUT ≤ VCC)
SYMBOL
VOH1
VOL
VOH2
IL
IID
IHH
IOZ
MIN
2.4
–
VCC - 0.4
-1
–
–
-10
MAX
–
0.50
–
1
500
500
10
UNITS
V
V
V
µA
µA
µA
µA
Notes: 1. All voltages referenced to VSS.
NOTES
1
1
8Mb Smart 5 Boot Block Flash Memory
MT28F800B5_3.fm - Rev. 3, Pub. 8/2002
18Micron Technology, Inc. Reserves the right to change products or specifications without notice.
©2002, Micron Technology Inc.
Share Link: 
