Philips Semiconductors
STN RGB - 132 × 132 × 3 driver
Objective speciï¬cation
PCF8833
6.1 Exit commands
Table 2 Command description
INPUT
COMMAND
Sleep_IN
(SLPIN)
Sleep_OUT
(SLPOUT)
BSTROFF
BSTRON
DISPOFF
DISPON
NORON
PTLON
SEP
PIXON (DAL)
PIXOFF
(DALO)
IDMOFF
IDMON
INVOFF
INVON
TEOFF
TEON
PARAMETERS
CONDITIONS
EXIT
COMMAND
Power-down mode:
display off
power-down has priority over display and Sleep_OUT
booster settings, but the setting is kept
display voltage generation off
exit power-down:
display → DISPON/DISPOFF
after reset; BSTRON and DISPON is set,
but become active only with Sleep_OUT
display voltage
generation → BSTRON/BSTROFF
(refresh from OTP cells if CALMM = 0)
Sleep_IN reset
display voltage generation off
display is switched on or off by
DISPON/DISPOFF
BSTRON reset
display voltage generation on
display is switched on or off by
DISPON/DISPOFF
BSTROFF
display off
display on
rows and columns are tied to VSS1
DISPON reset
DISPOFF
Normal mode on
full display is driven by RAM data
PTLON SEP
Partial mode on
partial display area is driven by RAM NORON SEP
data; display area outside partial area is reset
off
Scroll mode on
NORON
PTLON reset
in full Display mode (NORON) all pixels
are on; in partial Display mode only
partial area pixels are driven on; pixels
outside partial area are off
command INVON is not effective when
DAL is active
PIXOFF
(DALO)
NORON
PTLON SEP
reset
all pixel off
command INVON is not effective when
DALO is active
PIXON (DAL)
NORON
PTLON SEP
reset
Idle mode off
full colour resolution stored in the RAM is IDMON
written to the display
Idle mode on
8-colour mode became active: The MSB IDMOFF reset
of data stored in RAM is evaluated only
inverted display off
INVON
inverted display on
in Partial mode only pixels of partial area INVOFF reset
are inverted; INVON is not effective;
when DAL or DALO are active
tearing pulse disabled
TEON
tearing pulse enabled
TEOFF reset
2003 Feb 14
12