PI330MC-DR View Datasheet(PDF) - AMI Semiconductor
Part Name
Description
MFG CO.
'PI330MC-DR' PDF : 9 Pages View PDF
™ Peripheral
Imaging
Corporation
PI330MC-DR
300DPI CIS Two Level Digital Output Module
Engineering Data Sheet
Key Features
• Light source, lens, and sensor are integrated into a single module
• 11.8 dpm resolution, 89 mm scanning length
• Up to 423 µsec/line scanning speed, with 2.5 MHz pixel rate (See Table 3, Note 3.)
• Wide dynamic range
• Two-Level Tracking Digital Output (“Dynamic Threshold Digitizer”)
• Infrared light source 880nm (Other colors are available)
• Compact size ≅ 15 mm x 25.6 mm x 102 mm
• Low power
• Light weight
General Description
The PI330MC-DR is a contact image sensor, CIS, module with an additional on board
circuit that digitizes the analog pixels from the CIS image sensor to a “background-
tracking”, two-level digital output signals. It is based on CIS module, the PI305M-A6
manufactured by PIC, but with a shorter read length of 89 mm. Hence, its performance is
equivalent to the PI305M-A6 that uses MOS image sensor technology to gains its high-
speed performance and high sensitivity. The PI330MC-DR is suitable for scanning
documents with width of 89 mm and with resolution of 11.8 dots per millimeter. Its has a
broad applications, but specially designed for the following areas:
• Where data compression is required, such as in data transmissions.
• Where component pin-out count must be kept to a minimum.
PAGE 1 OF 9 - PI330MC-DR, 4/13/00
Share Link: 
