PI90LV022, PI90LVB022
LVDS Mux / Repeater 1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
Absolute Maximum Ratings Over Operating Free-Air Temperature†
Supply Voltage Range, VCC(1) ............................................................................... –0.5V to 4V
Voltage Range (DE, S0, S1) ...................................................................... –0.5 to 6V
Input Voltage Range, VI (A or B) ............................................ –0.5V to VCC + 0.5V
Electrostatic Discharge: A, B, Y, Z, and GND(2) ................ Class 3, A: 16kV, B:600V
All Pins ............................................ Class 3, A: 7kV, B:500V
Storage Temperature Range .............................................................. –65°C to 150°C
Lead Temperature 1, 6 mm (1/16 inch) from case for 10 seconds ................... 260°C
† Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent
damage to the device. These are stress ratings only, and functional operation of the device
at these or any other conditions beyond those indicated under "Recommended Operating
Conditions" is not implied. Exposure to Absolute-Maximum-Rated conditions for extended
periods may affect device reliability.
Notes:
1. All voltage values, except differential I/O bus voltages, are with respect to ground terminal.
2. Tested in accordance with MIL-STD-883C Method 3015.7
Recommended Operating Conditions
Supply Voltage, VCC
High-Level Input Voltage, VIH
Low-Level Input Voltage, VIL
Magnitude of Differential Input Voltage VID
Common-Mode input Voltage, VIC (see Figure 2)
S0, S1, 1DE, 2DE
S0, S1, 1DE, 2DE
Min.
3.0
2
Nom.
3.3
0.1
VID
2
Operating free-air temperature, TA
–40
Max.
3.6
0.8
0.6
2.4 – VID
2
VCC –0.8
85
Units
V
°C
3
PS8488B
09/28/04