PIC16CR58A-04I/SO View Datasheet(PDF) - Microchip Technology
Part Name
Description
MFG CO.
'PIC16CR58A-04I/SO' PDF : 217 Pages View PDF
PIC16C5X
PIC16C54/55/56/57
11.4 DC Characteristics: PIC16C54/55/56/57-RC, XT, 10, HS, LP (Commercial)
PIC16C54/55/56/57-RCI, XTI, 10I, HSI, LPI (Industrial)
DC Characteristics
All Pins Except
Power Supply Pins
Characteristic
Standard Operating Conditions (unless otherwise specified)
Operating Temperature 0°C ≤ TA ≤ +70°C (commercial)
–40°C ≤ TA ≤ +85°C (industrial)
Operating Voltage VDD range is described in Section 11.1, Section 11.2 and
Section 11.3.
Sym
Min
Typ(1)
Max
Units
Conditions
Input Low Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
VIL
VSS
VSS
VSS
VSS
VSS
—
0.2 VDD
— 0.15 VDD
— 0.15 VDD
— 0.15 VDD
—
0.3 VDD
V Pin at hi-impedance
V
V
V PIC16C5X-RC only(4)
V PIC16C5X-XT, 10, HS, LP
Input High Voltage
I/O ports
MCLR (Schmitt Trigger)
T0CKI (Schmitt Trigger)
OSC1 (Schmitt Trigger)
VIH
0.45 VDD —
VDD
2.0
—
VDD
0.36 VDD —
VDD
0.85 VDD —
VDD
0.85 VDD —
VDD
0.85 VDD —
VDD
0.7 VDD
—
VDD
V For all VDD(5)
V 4.0V < VDD ≤ 5.5V(5)
V VDD > 5.5V
V
V
V PIC16C5X-RC only(4)
V PIC16C5X-XT, 10, HS, LP
Hysteresis of Schmitt
Trigger inputs
VHYS 0.15VDD* —
—
V
Input Leakage Current(2,3)
IIL
For VDD ≤ 5.5V
I/O ports
–1
0.5
+1
µA VSS ≤ VPIN ≤ VDD,
Pin at hi-impedance
MCLR
–5
µA VPIN = VSS + 0.25V
0.5
+5
µA VPIN = VDD
T0CKI
–3
0.5
+3
µA VSS ≤ VPIN ≤ VDD
OSC1
–3
0.5
+3
µA VSS ≤ VPIN ≤ VDD,
PIC16C5X-XT, 10, HS, LP
Output Low Voltage
I/O ports
OSC2/CLKOUT
VOL
—
—
—
0.6
—
0.6
V IOL = 8.7 mA, VDD = 4.5V
V IOL = 1.6 mA, VDD = 4.5V,
PIC16C5X-RC
Output High Voltage
I/O ports(3)
OSC2/CLKOUT
VOH
VDD – 0.7 —
—
VDD – 0.7 —
—
V IOH = –5.4 mA, VDD = 4.5V
V IOH = –1.0 mA, VDD = 4.5V,
PIC16C5X-RC
* These parameters are characterized but not tested.
Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25°C. This data is for design guidance
only and is not tested.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input
voltage.
3: Negative current is defined as coming out of the pin.
4: For PIC16C5X-RC devices, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
PIC16C5X be driven with external clock in RC mode.
5: The user may use the better of the two specifications.
DS30453B-page 72
Preliminary
© 1998 Microchip Technology Inc.
Share Link: 
