PIC18F1220 View Datasheet(PDF) - Microchip Technology

Part Name

Description

MFG CO.

PIC18F1220

18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology

Microchip Technology 

Prev 71 72 73 74 75 76 77 78 79 80 Next

PIC18F1220/1320

REGISTER 9-3: INTCON3 REGISTER

R/W-1 R/W-1

U-0

R/W-0 R/W-0

U-0

R/W-0 R/W-0

INT2IP INT1IP

—

INT2IE INT1IE

—

INT2IF INT1IF

bit 7

bit 0

bit 7 INT2IP: INT2 External Interrupt Priority bit

1 = High priority

0 = Low priority

bit 6 INT1IP: INT1 External Interrupt Priority bit

1 = High priority

0 = Low priority

bit 5 Unimplemented: Read as ‘0’

bit 4 INT2IE: INT2 External Interrupt Enable bit

1 = Enables the INT2 external interrupt

0 = Disables the INT2 external interrupt

bit 3 INT1IE: INT1 External Interrupt Enable bit

1 = Enables the INT1 external interrupt

0 = Disables the INT1 external interrupt

bit 2 Unimplemented: Read as ‘0’

bit 1 INT2IF: INT2 External Interrupt Flag bit

1 = The INT2 external interrupt occurred (must be cleared in software)

0 = The INT2 external interrupt did not occur

bit 0 INT1IF: INT1 External Interrupt Flag bit

1 = The INT1 external interrupt occurred (must be cleared in software)

0 = The INT1 external interrupt did not occur

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

‘0’ = Bit is cleared x = Bit is unknown

Note:

Interrupt flag bits are set when an interrupt condition occurs, regardless of the state

of its corresponding enable bit or the global interrupt enable bit. User software

should ensure the appropriate interrupt flag bits are clear prior to enabling an

interrupt. This feature allows for software polling.

© 2007 Microchip Technology Inc.

DS39605F-page 77

Share Link: