PLCDA03C-6 View Datasheet(PDF) - ProTek Devices.
Part Name
Description
MFG CO.
'PLCDA03C-6' PDF : 9 Pages View PDF
Only One Name Means ProTek’Tion™
application information
1
2
3
4
PLCDA03C-6 - PLCDA15C-6
Line 6
Line 5
Line 4
Line 3
Line 2
Line 1
8
7
6
5
figure 1 - BIDIRECTIONAL COMMON-MODE PROTECTION for a transceiver
Circuit connectivity is as follows:
• Line 1 connected to Pin 1.
• Line 2 connected to Pin 2.
• Line 3 connected to Pin 3.
• Line 4 connected to Pin 8.
• Line 5 connected to Pin 7.
• Line 6 connected to Pin 6.
• Pins 4 and 5 connected to ground.
circuit board recommendations
Circuit board layout is critical for electromagnetic compatibility protection. The following guidelines are recommended:
• The protection device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conductive loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasitic inductance.
• Ground planes should be used whenever possible. For multilayer PCBs, use ground vias.
05102.R9 9/12
Page 6
www.protekdevices.com
Share Link: 
