PM4328 View Datasheet(PDF) - PMC-Sierra
Part Name
Description
MFG CO.
'PM4328' PDF : 250 Pages View PDF
STANDARD PRODUCT
DATASHEET
PMC-2011596
ISSUE 1
PM4328 TECT3
HIGH DENSITY T1/E1 FRAMER
AND M13 MULTIPLEXER
Jitter Tolerance
Jitter tolerance is the maximum input phase jitter at a given jitter frequency that a
device can accept without exceeding its linear operating range, or corrupting
data. For T1 modes the DJAT input jitter tolerance is 29 Unit Intervals peak-to-
peak (UIpp) with a worst case frequency offset of 354 Hz. For E1 modes the
input jitter tolerance is 35 Unit Intervals peak-to-peak (UIpp) with a worst case
frequency offset of 308 Hz. In either mode jitter tolerance is 48 UIpp with no
frequency offset. The frequency offset is the difference between the frequency
of XCLK divided by 24 and that of the input data clock.
Figure 8: DJAT Jitter Tolerance T1 Modes
100
28
10
Jitter
Amplitude,
UIpp
1.0
acceptable
29
DJAT minimum
tolerance
unacceptable
0.2
0.1
0.01
1
4.9 10
100 0.3k 1k
Jitter Frequency, Hz
10k
100k
PROPRIETARY AND CONFIDENTIAL
73
Share Link: 
