Qdatasheet_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

RC28F128J3D095 View Datasheet(PDF) - Numonyx -> Micron

Part Name
Description
MFG CO.
RC28F128J3D095
Numonyx
Numonyx -> Micron Numonyx
'RC28F128J3D095' PDF : 66 Pages View PDF
Numonyx™ Embedded Flash Memory (J3 v D, Monolithic)
Table 35: Query Structure
Offset
Sub-Section Name
Description
27h
Device Geometry Definition
Flash Device Layout
P(3)
Primary Numonyx-Specific Extended
Query Table
Vendor-Defined Additional Information Specific to
the Primary Vendor Algorithm
Notes:
1.
Refer to the Query Structure Output section and offset 28h for the detailed definition of offset address as a
function of device bus width and mode.
2.
BA = Block Address beginning location (i.e., 02000h is block 2’s beginning location when the block size is
128 Kbyte).
3.
Offset 15 defines “P” which points to the Primary Numonyx-Specific Extended Query Table.
Notes
1
1,3
13.3
Block Status Register
The Block Status Register indicates whether an erase operation completed successfully
or whether a given block is locked or can be accessed for flash program/erase
operations.
Table 36: Block Status Register
Offset
Length
Description
Address
Value
(BA+2)h(1)
1
Block Lock Status Register
BA+2:
--00 or --01
BSR.0 Block Lock Status
0 = Unlocked
1 = Locked
BA+2:
(bit 0): 0 or 1
BSR 1–15: Reserved for Future Use
BA+2:
(bit 1–15): 0
Note:
1.
BA = The beginning location of a Block Address (i.e., 008000h is block 1’s (64-KB block) beginning location in word
mode).
13.4
CFI Query Identification String
The CFI Query Identification String provides verification that the component supports
the Common Flash Interface specification. It also indicates the specification version and
supported vendor-specified command set(s).
Table 37: CFI Identification
Offset Length
Description
10h
3
Query-unique ASCII string “QRY”
13h
2
Primary vendor command set and control interface ID code.
16-bit ID code for vendor-specified algorithms
15h
2
Extended Query Table primary algorithm address
17h
2
Alternate vendor command set and control interface ID code.
0000h means no second vendor-specified algorithm exists
19h
2
Secondary algorithm Extended Query Table address.
0000h means none exists
Add.
10
11:
12:
13:
14:
15:
16:
17:
18:
19:
1A:
Hex
Code
--51
--52
--59
--01
--00
--31
--00
--00
--00
--00
--00
Value
“Q”
“R”
“Y”
Datasheet
60
December 2007
316577-06
Share Link: GO URL

All Rights Reserved © qdatasheet.com  [ Privacy Policy ] [ Contact Us ]