S5PV210 View Datasheet(PDF) - Samsung
Part Name
Description
MFG CO.
'S5PV210' PDF : 84 Pages View PDF
SMDK-V210_USER’S MANUAL_REV 0.0
1 INTRODUCTION
1.1 SYSTEM OVERVIEW
SMDK S5PV210 ( S5PV210 Development Kit) is a platform for code development of
SAMSUNG's S5PV210 16/32-bit RISC microcontroller (ARM-CORTEX A8). S5PV210 is used in
hand-held devices and general applications.
The S5PV210 is a 32-bit RISC cost-effective, low power, high performance microprocessor
solution for mobile phones and general applications, and integrates an ARM Cortex-A8 which
implements the ARM architecture V7-A with supporting numerous peripherals.
To provide optimized Hardware (H/W) performance for the 3G and 3.5G communication services,
S5PV210 adopts 64-bit internal bus architecture and includes many powerful hardware
accelerators for tasks such as motion video processing, display control and scaling. Integrated
Multi Format Codec (MFC) supports encoding and decoding of MPEG-1/2/4, H.263, H.264 and
decoding of VC1, Divx. This Hardware accelerators support realtime video conferencing and
Analog TV out, HDMI for NTSC and PAL mode
The S5PV210 has an optimized interface to external memory capable of sustaining the
demanding memory bandwidths required in high-end communication services. The memory
system has Flash/ ROM external memory ports for parallel access and DRAM port for high
bandwidth. DRAM port can be configured to support LPDDR1(=mobile DDR), DDR2 or LPDDR2.
Flash/ROM Port supports NAND Flash, NOR-Flash, OneNAND, SRAM and ROM type external
memory.
To reduce total system cost and enhance overall functionality, S5PV210 includes many hardware
peripherals such as TFT 24-bit true color LCD controller, Camera Interface, MIPI DSI, CSI-2,
System Manager for power management, ATA I/F, 4 UART, 24-channel DMA, 4 Timers, General
I/O Ports, 3 IIS, S/PDIF, 3 IIC-BUS interface, 3 HS-SPI, USB Host 2.0, USB OTG 2.0 operating at
high speed (480Mbps), 4 SD Host & High Speed Multi-Media Card Interface and 4 PLLs for clock
generation.
Package on Package (POP) option with MCP is available for small form factor applications.
Share Link: 
