SFH4580 View Datasheet(PDF) - OSRAM GmbH
Part Name
Description
MFG CO.
'SFH4580' PDF : 9 Pages View PDF
SFH 4580, SFH 4585
Lötbedingungen
Soldering Conditions
Reflow Lötprofil für bleifreies Löten
Reflow Soldering Profile for lead free soldering
Vorbehandlung nach JEDEC Level 3
Preconditioning acc. to JEDEC Level 3
(nach J-STD-020C)
(acc. to J-STD-020C)
300
ËšC
T 250
200
255 ËšC
240 ËšC
217 ËšC
150
100
50
0
0
Ramp Up
3 K/s (max)
25 ËšC
50
Maximum Solder Profile
Recommended Solder Profile
Minimum Solder Profile
OHLA0687
260
ËšC
+0 ËšC
-5 ËšC
245 ˚C ±5 ˚C
235
ËšC
+5 ËšC
-0 ËšC
10 s min
30 s max
120 s max
Ramp Down
6 K/s (max)
100 s max
min. condition for IR Reflow Soldering:
solder point temperature ≥ 235 °C for at least 10 sec.
100
150
200
250
s 300
t
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstrasse 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain
and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2009-08-21
8
Share Link: 
